2-Axis Force Sensor 1kN 500N 200N 100N 50N 20N 10N Biaxial Load
Cell
Biaxial force sensor F2Y is made based on strain gauge technology
offering 10N / 20N / 50N / 100N / 200N / 300N / 500N / 1000N eight
rated capacities for Fx/Fy two-dimensional force measurement. Both
axes support tension and compression force measurement. 2-axis load
cell F2Y can work with our 2-channel load cell amplifier LC2A to
deliver 0-5V / 0-10V / 4-20mA output that is proportional to the
force applied. Biaxial load cell is typically used for force
measurement and control in actuators, force simulators, operating levers. 2D load cell F2Y can be modified or customized
upon request to suit different applications.
Dimensions
Ordering code
| Part No. | Capacity | Material |
| Fx=Fy |
| F2Y-1kg | 1kgf | Aluminum |
| F2Y-2kg | 2kgf |
| F2Y-5kg | 5kgf |
| F2Y-10kg | 10kgf | Stainless steel |
| F2Y-20kg | 20kgf |
| F2Y-50kg | 50kgf |
| F2Y-100kg | 100kgf |
Specifications
| Rated Capacity | 1kg 2kg 5kg 10kg 20kg 50kg 100kg (10N 20N 50N 100N 200N 500N 1000N) |
| Rated output | 1.0~1.5mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.05mV/V |
| Non-linearity | ±0.2% of full scale |
| Hysteresis | ±0.2% of full scale |
| Non-repeatability | ±0.1% of full scale |
| Creep(5min) | ±0.1% of full scale |
| Safe overload | 150% of full scale |
| Ultimate overload | 200% of full scale |
| Compensated temperature | 0...+40oC |
| Operating temperature | -10...+60oC |
| Temperature shift on zero | ±0.03% R.O./oC |
| Temperature shift on span | ±0.02% R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 350±30 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP50 |
| Material of element | 1/2/5kg: Aluminum 10/20/50/100kg: Stainless steel |
| Cable | 2 x Ø3*3000mm 4-core shielded cable |
| Wiring code | Red--E+ Black--E- Green--S+ White--S- |
2-Axis Load Cell 1kN 500N 200N 100N 50N 20N 10N Bi-axial Force
Sensor
2-axis sensor F2Y measures forces simultaneously in Fx and Fy axis.
Each axis provides a full bridge output proportional to the applied
force and requires no mathematical manipulation. The acting force
causes deformation of the elastomer, the bonded strain gauge
deforms accordingly which will cause the resistance change of the
wheatstone bridge, under constant power supply, the output signal
between Sig+ and Sig- will change proportionally, thus the
load/force can be measured by measuring the output signal from the
transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of biaxial load cell F2Y is normally within
1.0-1.5mV/V.
Power supply of 2-axis force transducer F2Y is normally within
3-12V.
Load / Capacity is within 0-1.
So the output range of Multi-axis Force Sensor F2Y is normally
within -18mV...+18mV for bidirectional force measurement in each
axis.
Example: Multi axis load cell F2Y-50kg with 1.0mV/V sensitivity
powered by 10V DC, the output range is -10mV...+10mV.
A multi-channel signal conditioner can be used with biaxial force
sensor F2Y to deliver -5~5V, 0-10V or 4-20mA output.
Example: 2-axis sensor F2Y-10kg working with LC3A(-10-10V)-24V
amplifier, the Force-Voltage relationship in each axis will be
0-10kg load in Fx+/Fy+ direction VS 0-10V output, 0-10kg load in
Fx-/Fy- direction VS 0-(-10V) output, which is linear regardless of
the measurement error.
2-Axis Force Sensor 1kN 500N 200N 100N 50N 20N 10N Biaxial Load
Cell
Click here to download datasheet
