Rod End Compression Load Cell Force Sensor 100N 200N 500N 1kN 2kN
3kN 5kN 10kN
Rod End Load Cell Force Sensor FCL is made of stainless steel based on strain gauge
technology offering 100N / 200N / 300N / 500N / 1kN / 2kN / 3kN /
5kN / 10kN / 20kN / 30kN / 50kN rated capacities intended for both
tension and compression force measurement. The threaded rod on the
top of the sensor can be used to mount attachments such as load
buttons and eye bolts for different applications. Compared to
universal side cable outlet, force transducer FCL adopts bottom
cable outlet which helps save the mounting space, tension compression load cell FCL is suitable for in-line force measurement. Model FCL can be
modified or customized as per request of clients or different
applications.
Dimensions(Unit in milimeter)
Specifications
| Capacity | 10kg / 100N / 22lb
20kg / 200N / 44 lb
30kg / 300N / 66lbf
50kg / 500N / 110lb
100kg / 1kN / 220 lb
200kg / 2kN / 440lb
300kg / 3kN / 660 lb
500kg / 5kN / 1100lb
1000kg / 10kN / 2.2k lb
2000kg / 20kN / 4.4 klb
3000kg / 30kN / 6.6klb
5000kg / 50kN / 11 klb |
| Rated output | 1.5mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.3% R.O. |
| Hysteresis | ±0.3% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | 0...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.03% R.O./oC |
| Temperature shift span | ±0.03% R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 350±10 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP65 |
| Material of element | Stainless steel |
| Cable | Ø3*2000mm 4-core shielded cable |
Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Force Sensor is a transducer that converts mechanical load into mV signal
proportional to the applied force.The acting force causes
deformation of the measuring element,the bonded strain gage deforms
accordingly which will cause the resistance change of the
wheatstone bridge,under constant power supply, the output signal
between Sig+ and Sig- will change proportionally,thus the
load/force can be measured by measuring the output signal from the
transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output is normally within 1mV/V~3mV/V.
Power supply is normally within 3-15V.
Load / Capacity is within 0-1.
So the load cell output signal is normally within
0-45mV(-45mV...+45mV for bidirectional load cell).
Example one: FCL-300N with 1.5mV/V rated output powered by 3.3V
DC,the output range is -4.95mV...+4.95mV(Tension and compression).
Example two: FCL-100N with 1.5mV/V rated output powered by 10V
DC,the output range is -15mV...+15mV(Tension and compression).
A signal conditioner is normally used with the load cell to deliver
-5~5V, 0-10V or 4-20mA output for easy data processing:
Example: FCL-500N working with -5-5V amplifier,the load-output
relationship will be 0-500N compression load VS 0-5V output,0-500N
tension load VS 0-(-5V) output,when you get 2V output,it means the
current load is 200N compression force,when you get -1V output,it
means the current load is 100N tension force,and so on.
Rod End Compression Load Cell Force Sensor For Tension And
Compression Force Measurement
Click here to download datasheet
