Micro Tension Load Cell 1kg 2kg 5kg 10kg 20kg Miniature jr S-beam
Load Cell
Miniature Tension Load Cell FSSQ offers a compact design for a variety of applications. the S
Beam Load Cell series provides accuracy, compact design features,
and 5 capacity ranges 1kg / 2kg / 5kg / 10kg / 20kg to choose
from.The jr s-beam load cell FSSQ utilizes metal foil strain gauge
technology to deliver 2.0mV/V output with maximum 0.2%
non-linearity,the compact design enables the FSSQ to be easily
embedded into machinery or test equipment – ideal for packaging
machinery, assembly machinery or end-of-line test equipment.The Micro Force Sensor FSSQ features M2 threaded holes on two sides for the mounting of
attachments or implements for both tension and compression force
measurement in applications with limited space.
Dimensions(unit in "mm")
Specifications
| Capacity | 10N / 1kg / 2.2 lbf
20N / 2kg / 4.4 lbf
50N / 5kg / 11 lb
100N / 10kg / 22 lbf
200N / 20kg / 45 lbs |
| Rated output | 2.0mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.2% R.O. |
| Hysteresis | ±0.2% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.03% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 352±3 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Stainless steel |
| Cable | Ø2*3000mm 4-core shielded |
| Wiring code | Compression@
Red--Exc+ Black--Exc- Green--Sig+ White--Sig- |
Wheatstone Bridge:A Wheatstone bridge is a network of four
resistive legs. One or more of these legs can be active sensing
elements. The Wheatstone bridge is the electrical equivalent of two
parallel voltage divider circuits. R1 and R2 compose one voltage
divider circuit, and R4 and R3 compose the second voltage divider
circuit. The output of a Wheatstone bridge is measured between the
middle nodes of the two voltage dividers.
Rated Capacity: The maximum axial load the load cell is designed to
measure within its specifications.
Non-linearity: The maximum deviation of the calibration curve from
a straight line drawn between the no-load and rated outputs;
expressed as a percentage of the rated output and measured on
increasing load only.
Non-repeatability: The maximum difference between load cell output
readings for repeated loadings under identical loading and
environmental conditions.
Miniature Tension Load Cell FSSQ outputs mV signal from the full
wheatstone bridge which is proportional to the applied load,a load
cell amplifier can be used to convert mV signal into -5-5V / 0-10V
/ 4-20mA for easy signal processing,taking FSSQ-100N and
FSC(-5-5V)-24V for example,the load-voltage relationship will be
0-100N compression load VS 0-5V output, 0-100N tension load VS
0-(-5V) output, 2V voltage corresponds to 40N compression load, -1V voltage
corresponds to 20N tension force,and so on.
Micro Tension Force Sensor 10N 20N 50N 100N 200N Miniature jr
S-beam Load Cell
Click here to download
datasheet
