Flange Compression Load Cell 4.5lb 10lb 20lb 45lb 112lb 225lb 450lb
Compression Force Transducer
Miniature Flange Type Compression Load Cell FFG is made of stainless steel utilizing strain gauge technology
to deliver maximum 0.1% non-linearity of rated output.Miniature
flange force sensor FFG offers 0-4.5lb / 0-11lb / 0-22lb / 0-45lb /
0-112lb / 0-225lb / 0-450lb seven rated measuring ranges to choose
from, Compression Force Transducer FFG can be used for both tension
and compression force measurement. Stainless steel construction,
flange design, compact size, bidirectional force measurement, high
accuracy, Miniature Column Load Cell FFG offers a perfect mixture
for applications such as wire tension control, force distribution
analysis, automated control, cylinder thrust measurement, assembly
force monitoring, spring testing, ultrasonic welding clamp force
control, hand press force verification,and so on. In addition to
the standard specifications, Forsentek is also capable of and
willing to provide custom design service to meet requirements of
different applications.
| Ordering code | Measurement Range | Force direction |
| FFG-20N | 0-20N / 0-2kgf | Tension/compression |
| FFG-50N | 0-50N / 0-5kgf |
| FFG-100N | 0-100N / 0-10kgf |
| FFG-200N | 0-200N / 0-20kgf |
| FFG-500N | 0-500N / 0-50kgf |
| FFG-1kN | 0-1000N / 0-100kgf |
| FFG-2kN | 0-2000N / 0-200kgf |
Specifications
| Capacity | 2kg / 5kg / 10kg / 20kg / 50kg / 100kg / 200kg 20N / 50N / 100N / 200N / 500N / 1kN / 2kN
4.4lb / 10lb / 20lb / 45lb / 110lb / 220lbs / 450lbf |
| Rated output | 2.0 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.1% R.O. |
| Hysteresis | ±0.1% R.O. |
| Nonrepeatability | ±0.05% R.O. |
| Creep(5min) | ±0.05% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 350±30 ohms |
| Output resistance | 350±5 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Force Sensor is a transducer that converts mechanical load into
mV signal proportional to the applied force.The acting force causes
deformation of the measuring element,the bonded strain gage deforms
accordingly which will cause the resistance change of the
wheatstone bridge,under constant power supply, the output signal
between Sig+ and Sig- will change proportionally,thus the
load/force can be measured by measuring the output signal from the
transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of flange type cylindrical load cell FFG is around
2.0mV/V.
Power supply of flanged column load cell FFG is normally within
3-15V.
Load / Capacity is within 0-1.
So the output range of flange mounted load cell FFG is normally
within 0-30mV(-30mV...+30mV for tension and compression force
measurement).
Example one: Flange Load Cell FFG-500N with 2.0mV/V sensitivity
powered by 5V DC,the output range is -10mV...+10mV(Tension and
compression).
Example two: Tension Compression Load Cell FFG-200N with 2.0mV/V
sensitivity powered by 10V DC,the output range is
-20mV...+20mV(Tension and compression).
A signal conditioner can be used with the load cell to deliver
-5~5V, 0-10V or 4-20mA output.
Example: Miniature Flange Force Transducer FFG-1kN working with
-10-10V amplifier,the Force-Voltage relationship will be 0-1000N
compression load VS 0-10V output, 0-1000N tension load VS 0-(-10V)
output,which is linear regardless of the measurement error.
Flange Compression Force Transducer 4.5lbf 10lb 20lb 45lb 112lb
225lb 450lb Compression Load Cell
Click here to download
datasheet
