Miniature Press Load Cell 50N Push Force Sensor 100N Press Force
Transducer 200N
Miniature Press Load Cell FFG is made of stainless steel utilizing
strain gauge technology to deliver maximum 0.1% non-linearity of
rated output. Miniature Press Force Sensor FFG offers 0-20N / 0-50N
/ 0-100N / 0-200N / 0-500N / 0-1000N / 0-2000N seven rated
measuring ranges to choose from, Press Force Transducer FFG can be
used for both tension and compression force measurement. Stainless
steel construction, flange design, compact size, bidirectional
force measurement, high accuracy, Miniature Push Load Cell FFG
offers a perfect mixture for applications such as wire tension
control, force distribution analysis, automated control, cylinder thrust measurement, assembly force monitoring, spring testing, ultrasonic welding clamp
force control, hand press force verification,and so on. In addition
to the standard specifications, Forsentek is also capable of and
willing to provide custom design service to meet requirements of
different applications.
| Ordering code | Measurement Range | Force direction |
| FFG-20N | 0-20N / 0-2kgf | Tension/compression |
| FFG-50N | 0-50N / 0-5kgf |
| FFG-100N | 0-100N / 0-10kgf |
| FFG-200N | 0-200N / 0-20kgf |
| FFG-500N | 0-500N / 0-50kgf |
| FFG-1kN | 0-1000N / 0-100kgf |
| FFG-2kN | 0-2000N / 0-200kgf |
Specifications
| Capacity | 20N / 50N / 100N / 200N / 500N / 1kN / 2kN
2kg / 5kg / 10kg / 20kg / 50kg / 100kg / 200kg
4.4lb / 10lb / 20lb / 45lb / 110lb / 220lbs / 450lbf |
| Rated output | 2.0 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.1% R.O. |
| Hysteresis | ±0.1% R.O. |
| Nonrepeatability | ±0.05% R.O. |
| Creep(5min) | ±0.05% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 350±30 ohms |
| Output resistance | 350±5 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Force Sensor is a transducer that converts mechanical load into
mV signal proportional to the applied force.The acting force causes
deformation of the measuring element,the bonded strain gage deforms
accordingly which will cause the resistance change of the
wheatstone bridge,under constant power supply, the output signal
between Sig+ and Sig- will change proportionally,thus the
load/force can be measured by measuring the output signal from the
transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of flange type press load cell FFG is around 2.0mV/V.
Power supply of miniature press force load cell FFG is normally
within 3-15V.
Load / Capacity is within 0-1.
So the output range of flange mounted push force transducer FFG is
normally within -30mV...+30mV for pull and push force measurement.
Example one: Press Force Sensor FFG-50N with 2.0mV/V sensitivity powered by 5V DC,the output range
is -10mV...+10mV(Pull and Push).
Example two: Pull And Push Load Cell FFG-100N with 2.0mV/V
sensitivity powered by 10V DC,the output range is
-20mV...+20mV(Tension and compression).
A signal conditioner can be used with the load cell to deliver
-5~5V, 0-10V or 4-20mA output.
Example: Press Force Load Cell FFG-200N working with -10-10V
amplifier,the Force-Voltage relationship will be 0-200N compression
load VS 0-10V output, 0-200N tension load VS 0-(-10V) output, which
is linear regardless of the measurement error.
Miniature Press Load Cell 200N Push Force Sensor 100N Press Force
Transducer 50N
Click here to download
datasheet
