Small Size Compression Load Cell 2000kg Miniature Button Load Cell
1000kg
Miniature Button Load Cell FC2D is made of stainless steel based on strain gauge technology
which offers 1000kg / 2000kg two rated capacities to choose from,
compact design makes button type load cell FC2D suitable for
compression force measurement applications with limited mounting
space. Each sensor comes with a 3-meter-long shielded cable, 4xM2.5
threaded holes located on the bottom make it easy to mount force
sensor FC2D to a flat platform,you may find Miniature Button Load Cell FC2D suitable for applications such as load distribution analysis,
mold pressure measurement, force overload protection, clamping
force measurement, assembly force monitoring, hydraulics force
control and so on.
A Load Cell is a transducer that converts force acting on it into
electronic signal which is proportional to the applied force.The
acting force causes deformation of the measuring element,the bonded
strain gage deforms accordingly which will cause the resistance
change of the wheatstone bridge,under constant power supply,the
output signal between Sig+ and Sig- will change proportionally,thus
the force can be measured by measuring the output signal from the
load cell. Miniature Compression Load Cell FC2D is designed to measure force in compression direction,outputs
millivolt signal within 0~22.5mV, and signal amplification may be
required for most applications, a load cell signal conditioner can
be used to convert mV signal into -5-5V, 0-10V or 4-20mA output
which is proportional to applied force.The amplified output then
can be easily processed by PLCs and data acquisition software. The
force can also be displayed through force indicator,force meter FPT
is integrated with high accuracy/low noise 24 bit Sigma-Delta
ADC,sampling speed up to 960Hz makes it suitable for both static
and dynamic measurement;FPT also supports Modbus RTU protocol with
RS485 or RS232 communication port,amplified signal
0-5V,0-10V,0-20mV or 4-20mA is also achievable from FPT.
Dimensions(unit in "mm")
Specifications
| Capacity | 10kN / 1000kg / 2.2klb 20kN / 2000kg / 4.5klb |
| Rated output | 1.5mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±1% of full capacity |
| Hysteresis | ±1% of full capacity |
| Nonrepeatability | ±0.5% of full capacity |
| Creep(3min) | ±0.3% of full capacity |
| Safe overload | 150% of full capacity |
| Ultimate overload | 200% of full capacity |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./oC |
| Temperature shift span | ±0.05% R.O./oC |
| Input resistance | 1000±100 ohms |
| Output resistance | 1000±100 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP65 |
| Material of element | Stainless steel |
| Cable | Ø1.9*3000mm 4-core shielded cable |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
Small Size Compression Load Cell 2000kg Miniature Button Load Cell
1000kg
Output signal of load cell and amplifier:
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of Button Load Cell FC2D is normally around 1.5mV/V.
Power supply of Press Load cell FC2D is normally within 3-15V.
Load / Capacity is within 0-1.
So the output range of Compression Type Force Sensor FC2D is
normally within 0…+22.5mV.
Example one: Miniature Button Load Cell FC2D-1000kg with 1.5mV/V
sensitivity powered by 5V DC,the output range is 0mV...+7.5mV.
Example two: Miniature Compression Load Cell FC2D-2000kg with
1.5mV/V rated output powered by 10V DC,the output range is
-0mV...+15mV.
The mV/V output from the wheatstone bridge sometimes can hardly be
processed directly, a signal conditioner can be used with the load
cell to deliver -5~5V, 0-10V or 4-20mA output.
Example one: Button Type Compression Load Cell FC2D-2000kg working
with amplifier FSC(0-10V)-24V,the Load-Voltage relationship will be
0-2000kg compression force VS 0-10V output, which is linear
regardless of the measurement error, 1V output corresponds to 200kg
compression load, 2V output corresponds to 400kg compression load,
and so on.
Example two: Miniature Button Type Load Cell FC2D-2000kg working
with amplifier FSC(4-20mA)-24V,the Force-Current relationship will
be 0-2000kg compression force VS 4-20mA output, which is linear
regardless of the measurement error, 4mA output corresponds to “0”
load, 5.6mA output corresponds to 200kg compression load, 12mA
output corresponds to 1000kg compression load, and so on.
