Miniature Compression Load Cell 1kg With Flanged Surface Micro
Compression Sensor 2kg
Flanged Micro Load Cell FCFK is made of stainless steel based on strain gauge technology
to deliver maximum 0.3% non-linearity of the rated capacity.
Flanged Miniature Compression Sensor FCFK offers 0-1kgf / 0-2kgf / 0-5kgf / 0-10kgf / 0-20kgf / 0-50kgf
/ 0-100kgf / 0-200kgf eight measuring ranges to choose from, flange
to flange mounting, compact design, you may find micro force
transducer FCFK applicable for compression force measurement
applications where mounting space is limited, such as fixture
clamping force measurement, assembly force monitoring, force
distribution test, force simulator, pinch force measurement, etc..
Miniature Flat Load Cell FCFK can also be modified or customized as
per client's request.
Dimensions(in milimeter)
| Ordering code | Measurement Range | Force direction |
| FCFK-10N | 0-10N / 0-2.2lb | Compression |
| FCFK-20N | 0-20N / 0-4.4lb |
| FCFK-50N | 0-50N / 0-0-10lb |
| FCFK-100N | 0-100N / 0-20lb |
| FCFK-200N | 0-200N / 0-45lb |
| FCFK-500N | 0-500N / 0-112lbf |
| FCFK-1kN | 0-1000N / 0-225lbs |
| FCFK-2kN | 0-2000N / 0-450lbf |
Specifications
| Capacity | 1kg / 2kg / 5kg / 10kg / 20kg / 50kg / 100kg / 200kg 2.2lb / 4.4lb / 11lb / 22lb / 45lb / 112lb / 225lbf / 450lbs
10N / 20N / 50N / 100N / 200N / 500N / 1kN / 2kN |
| Rated output | 2.0 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.3% R.O. |
| Hysteresis | ±0.3% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.03% R.O./oC |
| Temperature shift span | ±0.03% R.O./oC |
| Input resistance | 385±50 ohms |
| Output resistance | 350±5 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP50 |
| Material of element | Stainless steel |
| Cable | Ø2*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
Miniature Compression Force Load Cell 1kg 2kg 5kg 10kg 20kg 50kg
100kg 200kg With Flanged Surface
Output signal of load cell FCFK:
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of Micro Load Cell FCFK is normally around 2.0mV/V.
Power supply of Pinch Force Sensor FCFK is normally within 3-15V.
Load / Capacity is within 0-1.
So the output range of Compression Type Force Transducer FCFK is
normally within 0…+30mV.
Example one: Miniature Compression Sensor FCFK-100N with 2.0V/V
sensitivity powered by 5V DC,the output range is 0mV...+10mV.
Example two: Micro Compression Force Transducer FCFK-20N with
2.0mV/V rated output powered by 10V DC,the output range is
0mV...+20mV.
The mV/V output from the wheatstone bridge sometimes can hardly be
processed directly, a signal conditioner can be used with the load
cell to deliver 0~5V, 0-10V or 4-20mA output.
Example one: Micro Force Sensor FCFK-10N working with amplifier FSC(0-10V)-24V,the Load-Voltage
relationship will be 0-10N compression force VS 0-10V output, which
is linear regardless of the measurement error, 1V output
corresponds to 1N compression load, 2V output corresponds to 2N
compression load, and so on.
Example two: Miniature Flanged Force Transducer FCFK-50N working
with amplifier FSC(4-20mA)-24V,the Force-Current relationship will
be 0-50N compression force VS 4-20mA output, which is linear
regardless of the measurement error, 4mA output corresponds to “0”
load, 5.6mA output corresponds to 5N compression load, 12mA output
corresponds to 25N compression load, and so on.
Load cell FCFK can also work with digital indicator FPT to deliver
below functions:
-Display force value in real time
-Peak holding to grab the maximum force during testing
-RS485 or RS232 interface
-0-5V/0-10V/4-20mA analog output
-Switch output
Miniature Compression Load Cell 1kg With Flanged Surface Micro
Compression Sensor 2kg
Click here to download
datasheet
