Micro Load Cell With M3 Mounting Hole Tension Compression Sensor
1kg 2kg 5kg 10kg 20kg
Miniature Force Transducer FLAE is made of stainless steel
utilizing strain gauge technology to deliver maximum 0.2%
non-linearity of rated output. Micro Cylindrical Load Cell FLAE
offers 0-1kg / 0-2kg / 0-5kg / 0-10kg / 0-20kg five rated
capacities to choose from. M3 threaded holes located on two sides
of the transducer can be used to mount attachments or implements to
adapt to different force measurement cases, miniature column type
load cell FLAE can be used for both tension and compression force
measurement. Stainless steel construction, compact size,
bidirectional force measurement, high accuracy, Micro Force Load
Cell FLAE offers a perfect mixture for applications such as wire
tension control, force distribution analysis, automated control,
cylinder thrust measurement, assembly force monitoring, spring
testing, ultrasonic welding clamp force control and so on. In
addition to the standard specifications, Forsentek is also capable
of providing custom design service to meet requirements of
different applications.
| Ordering code | Measurement Range | Force direction |
| FLAE-10N | 0-10N / 0-1kgf | Tension and compression |
| FLAE-20N | 0-20N / 0-2kgf |
| FLAE-50N | 0-50N / 0-5kgf |
| FLAE-100N | 0-100N / 0-10kgf |
| FLAE-200N | 0-200N / 0-20kgf |
Specifications
| Capacity | 10N / 1kg / 2lb
20N / 2kg / 4lb
50N / 5kg / 11lb
100N / 10kg / 22 lb
200N / 20kg / 45 lb |
| Rated output | 2.0 mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.2% of the capacity |
| Hysteresis | ±0.2% of the capacity |
| Nonrepeatability | ±0.1% of the capacity |
| Creep(5min) | ±0.1% of the capacity |
| Safe overload | 150% of the capacity |
| Ultimate overload | 200% of the capacity |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.03% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 352±3 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP50 |
| Material of element | Stainless steel |
| Cable | Ø2*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
Micro Load Cell With M3 Mounting Hole Tension Compression Sensor
1kg 2kg 5kg 10kg 20kg
A Force Sensor is a transducer that converts mechanical load into
mV signal proportional to the applied force.The acting force causes
deformation of the measuring element,the bonded strain gage deforms
accordingly which will cause the resistance change of the
wheatstone bridge,under constant power supply, the output signal
between Sig+ and Sig- will change proportionally,thus the
load/force can be measured by measuring the output signal from the
transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of miniature cylindrical load cell FLAE is around
2.0mV/V.
Power supply of micro column force sensor FLAE is normally within
3-12V.
Load / Capacity is within 0-1.
So the output range of miniature force transducer FLAE is normally
within -24mV...+24mV for tension/compression force measurement.
Example one:Miniature tension/compression load cell FLAE-10N with
2.0mV/V sensitivity powered by 5V DC,the output range is
-10mV...+10mV.
Example two: Micro tension and compression force sensor FLAE-20N
with 2.0mV/V sensitivity powered by 10V DC,the output range is
-20mV...+20mV.
A signal conditioner can be used with the load cell to deliver
-5~5V, 0-10V or 4-20mA output.
Example one: Micro tension compression load cell FLAE-100N working
with -10-10V amplifier,the Force-Voltage relationship will be
0-100N compression load VS 0-10V output,0-100N traction load VS
0-(-10V) output, which is linear regardless of the measurement
error. When you get 5V output, it means the current load is 50N
compression force, when you get -1V output, it means the current
load is 10N tensile force,and so on.
Example two: Micro tension compression load cell FLAE-1kg working
with 4-12-20mA amplifier,the Force-Current relationship will be
0-1kg compression force VS 12-20mA output, 0-1kg traction force VS
12-4mA output, which is linear regardless of the measurement error.
Namely 12mA output corresponds to “0” load, 12.8mA output
corresponds to 0.1kgf compressive load, 8mA output corresponds to
0.5kgf tensile load, and so on.
Micro Load Cell With M3 Mounting Hole Tension Compression Sensor
1kg 2kg 5kg 10kg 20kg
Click here to download
datasheet
