Micro Traction Load Cell 10N Miniature Force Transducer 20N
Compression Sensor 50N
Miniature Compression Traction Force Sensor FLAE is made of
stainless steel utilizing strain gauge technology to deliver
maximum 0.2% non-linearity of rated output. Micro Tension
Compression Load Cell FLAE offers 0-1kg / 0-2kg / 0-5kg / 0-10kg /
0-20kg (0-10N / 0-20N / 0-50N / 0-100N / 0-200N) five rated capacities to choose from. M3 threaded holes located
on two sides of the transducer can be used to mount attachments or
implements to adapt to different force measurement cases, miniature
column type load cell FLAE can be used for both tension and
compression force measurement. Stainless steel construction,
compact size, bidirectional force measurement, high accuracy, Micro
Force Load Cell FLAE offers a perfect mixture for applications such
as wire tension control, force distribution analysis, automated
control, cylinder thrust measurement, assembly force monitoring,
spring testing, ultrasonic welding clamp force control and so on.
In addition to the standard specifications, Forsentek is also
capable of providing custom design service to meet requirements of
different applications.
| Ordering code | Measurement Range | Force direction |
| FLAE-10N | 0-10N / 0-1kgf | Tension and compression |
| FLAE-20N | 0-20N / 0-2kgf |
| FLAE-50N | 0-50N / 0-5kgf |
| FLAE-100N | 0-100N / 0-10kgf |
| FLAE-200N | 0-200N / 0-20kgf |
Specifications
| Capacity | 10N / 1kg / 2lb
20N / 2kg / 4lb
50N / 5kg / 11lb
100N / 10kg / 22 lb
200N / 20kg / 45 lb |
| Rated output | 2.0 mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.2% of the capacity |
| Hysteresis | ±0.2% of the capacity |
| Nonrepeatability | ±0.1% of the capacity |
| Creep(5min) | ±0.1% of the capacity |
| Safe overload | 150% of the capacity |
| Ultimate overload | 200% of the capacity |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.03% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 352±3 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP50 |
| Material of element | Stainless steel |
| Cable | Ø2*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
Micro Traction Load Cell 10N Miniature Force Transducer 20N
Compression Sensor 50N
A Force Sensor is a transducer that converts mechanical load into
mV signal proportional to the applied force.The acting force causes
deformation of the measuring element,the bonded strain gage deforms
accordingly which will cause the resistance change of the
wheatstone bridge,under constant power supply, the output signal
between Sig+ and Sig- will change proportionally,thus the
load/force can be measured by measuring the output signal from the
transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of miniature cylindrical load cell FLAE is around
2.0mV/V.
Power supply of micro column force transducer FLAE is normally
within 3-12V.
Load / Capacity is within 0-1.
So the output range of miniature force transducer FLAE is normally
within -24mV...+24mV for tension/compression force measurement.
Example one: Miniature traction/compression load cell FLAE-50N with
2.0mV/V sensitivity powered by 5V DC,the output range is
-10mV...+10mV.
Example two: Micro Compression And Traction Force Sensor FLAE-20N
with 2.0mV/V sensitivity powered by 10V DC,the output range is
-20mV...+20mV.
A signal conditioner can be used with the load cell FLAE to deliver
-5~5V, 0-10V or 4-20mA output.
Example one: Miniature tension compression load cell FLAE-100N
working with -10-10V amplifier,the Force-Voltage relationship will
be 0-100N compression load VS 0-10V output,0-100N traction load VS
0-(-10V) output, which is linear regardless of the measurement
error. When you get 5V output, it means the current load is 50N
compression force, when you get -1V output, it means the current
load is 10N tensile force,and so on.
Example two: Miniature Tension/Compression Force Sensor FLAE-10N
working with 4-12-20mA amplifier,the Force-Current relationship
will be 0-10N compression force VS 12-20mA output, 0-10N traction
force VS 12-4mA output, which is linear regardless of the
measurement error. Namely 12mA output corresponds to “0” load,
12.8mA output corresponds to 1N compressive load, 8mA output
corresponds to 5N tensile load, and so on.
Micro Traction Load Cell 10N Miniature Force Transducer 20N
Compression Sensor 50N
Click here to download
datasheet
