Flange type reaction torque sensor 17.7lbf-in 26.5lbf*in 44 lbf-in
88 lbf*in torque measurement transducer
Minaiture flange mounted reaction torque transducer FTE is strain
gauge based intended for reaction torque measurement in both
clockwise and anticlockwise direction.Torque cell FTE offers 0.88lbf*in / 1.77lbf-in / 4.4lbf*in / 8.8lb-in / 17.7lbf*in /
26.5lbf-in / 44 lbf-in / 88 lb*in / 177 lb-in / 265lbf-in /
442lbf*in / 885lbf-in twelve rated capacities to choose from,high accracy with maximum
0.2% non-linearity of the full scale. End flanges located on both
sides of the torque transducer can be used for bolting between
shaft or mounting plates,very compact size makes model FTE suitable
for torque measurement where mounting space is limited. Torque
meter FTE can be modified or customized as per client's request to
meet requirements of different applications.
Dimensions(unit in "mm")
Specifications
| Capacity | 0.1NM / 0.88lbf-in 0.2NM / 1.7 lbf-in 0.5NM / 4.4lbf*in 1NM / 8.8lb-in 2NM / 17.7lbf*in 3NM / 26. lbf-in 5NM / 44lbf-in 10NM / 88lb*in 20NM / 177lb-in 30NM / 265lbf-in 50NM / 442lbf*in 100NM / 885lb*in |
| Rated output | 1.0mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.2% R.O. |
| Hysteresis | ±0.2% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(10min) | ±0.1% R.O. |
| Safe overload | 120% F.S. |
| Ultimate overload | 150% F.S. |
| Compensated temp. | -10...+40oC |
| Operating temp. | -20...+60oC |
| Temp. shift zero | ±0.02% R.O./oC |
| Temp. shift span | ±0.02% R.O./oC |
| Input resistance | 700ohms |
| Output resistance | 700ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP50 |
| Material of element | Aluminum alloy |
| Cable | Ø3*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A torque sensor is a transducer that converts a torsional mechanial
input into an electrical output signal.Miniature torque sensor FTE
is designed to measure non-rotating torque which is also known as
reaction torque.Micro torque transducer FTE utilizes strain gauge
technology to deliver mV/V output from the full wheatstone bridge.
Torque sensor output: = (Power supply * Rated output) * Load / Capacity
Rated output is normally within 1mV/V~3mV/V.
Power supply is normally within 3-15V.
Load / Capacity is within 0-1.
So the torque transducer output signal is normally within
0-45mV(-45mV...+45mV for bidirectional load cell).
Example one: 2.0mV/V torque cell with 10V power supply,the output
range is-20mV...+20mV.
Example two: 1.0mV/V torque meter with 5V power supply,the output
range is -5mV...+5mV.
Torque sensor + Signal amplifier:
Torque meter normally outputs -30mV...+30mV which sometimes cannot
be recognized by signal processing units directly,so signal
conditioner is introduced to convert mV signal into
0-5V/0-10V/4-20mA for easy signal processing.
Example: FTE-1NM working with amplifier FSC(-5-5V)-24V,the
torque-output relationship will be clockwise 0~1NM torque VS 0~5V
output, anticlockwise 0~1NM torque VS 0~(-5V) output ,it is linear
within the error range.
Torque transducer + Digital indicator:
Digital indicator can work directly with torquemeter without signal
amplifier,here are some functions from the indicator:
-Display torque value in real time
-Peak holding to grab the maximum torque during testing
-RS485 or RS232 interface
-0-5V/0-10V/4-20mA analog output
-Switch output
Click here to download datasheet
