Washer Load Cell 5kN 10kN Through Hole Force Transducer 20kN 30kN
50kN
Hollow Through Hole Load Cell FDBH is made of stainless steel based
on strain gauge technology to deliver maximum 0.5% non-linearity of
the rated capacity intended for both traction and compression force
measurement. Washer Load Cell FDBH offers 0-5kN / 0-10kN / 0-20kN /
0-30kN / 0-50kN five rated measuring ranges to choose from. Hollow
type load cell FDBH features a M30 threaded hole located at the
center of the transducer, which offers following two mounting
methods:
- Load structure passes through the sensor to measure compression
force
- Load structure connects with the M30 threaded hole to measure
compression/tension force
Donut type force sensor FDBH is very suitable for
clamping/fastening force measurement, to meet requirements of
different applications, model FDBH can also be modified or
customized.
Dimensions
| Ordering code | Measurement Range | Force direction |
| FDBH-5kN | 0-500kgf / 0-1100lbf | |
| FDBH-10kN | 0-1000kgf / 0-2200lbf | Tension and Compression |
| FDBH-20kN | 0-2000kgf / 0-4500lbf |
| FDBH-30kN | 0-3000kgf / 0-6700lbs |
| FDBH-50kN | 0-5000kgf / 0-11200lbf |
Specifications
| Capacity | 5kN / 10kN / 20kN / 30kN / 50kN 1.1klb / 2.2klb / 4.5klb / 6.7klbs / 11.2klbf 500kg / 1ton / 2 ton / 3 ton / 5ton |
| Rated output | 1.5 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.5% R.O. |
| Hysteresis | ±0.5% R.O. |
| Nonrepeatability | ±0.2% R.O. |
| Creep(10min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 750±50 ohms |
| Output resistance | 700±10 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP65 |
| Material of element | Stainless steel |
| Cable | Ø5*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
Washer Load Cell 5kN 10kN Through Hole Force Transducer 20kN 30kN
50kN
Output signal of load cell FDBH:
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of Hollow Load
Cell FDBH is normally around 1.5mV/V.
Power supply of Washer Type Force Sensor FDBH is normally within
3-15V.
Load / Capacity is within 0-1.
So the output range of Clamping Force Transducer FDBH is normally
within 0…+22.5mV.
Example one: Through Hole Load Cell FDBH-50kN with 1.5mV/V
sensitivity powered by 10V DC,the output range is 0mV...+15mV.
Example two: Hollow Type Load Cell FDBH-10kN with 1.5mV/V rated
output powered by 5V DC,the output range is 0mV...+7.5mV.
The mV/V output from the wheatstone bridge sometimes can hardly be
processed directly, a signal conditioner can be used with the load
cell to deliver 0~5V, 0-10V or 4-20mA output.
Example: Washer Type Load Cell FDBH-10kN working with amplifier
FSC(0-10V)-24V,the Load-Voltage relationship will be 0-10kN
compression force VS 0-10V output, which is linear regardless of
the measurement error, 1V output corresponds to 1kN load, 2V output
corresponds to 2kN force, and so on.
Thru-hole Loadcell FDBH can also work with digital indicator FPT to
deliver below functions:
-Display force value in real time
-Peak holding to grab the maximum force during testing
-RS485 or RS232 interface
-0-5V/0-10V/4-20mA analog output
-Switch output
Washer Load Cell 5kN 10kN Through Hole Force Transducer 20kN 30kN
50kN
Click here to download
datasheet
